Specification & Parameters Required as per below table for selection of best suitable Expansion bellow Used in Industrial application Power Plant, Cement Plant and Others Process & Manufacturing Industry.
This is Very Important sheet in which complete data mention for selection of Material and Metallurgy required for expansion bellow for different application in Industry.
Parameter required for designing of Metallic, Rubber, Teflon, Fabric Expansion Bellows | ||
1 | ITEM NO./ TAG NO. | |
2 | NOMINAL SIZE (NB) | |
3 | QUANTITY | |
4 | TYPE OF EXPANSION JOINTS | |
5 | FLUID INFORMATION | |
5.1 | MEDIUM | |
5.2 | VELOCITY (ft. sec.) | |
6 | WORKING TEMPERATURE ( C ) | |
7 | WORKING PRESSURE (kg/cm2) | |
8 | DESIGN TEMPERATURE ( C ) | |
9 | DESIGN PRESSURE (kg/cm2) | |
10 | TEST PRESSURE (kg/cm2) | |
11 | MOVEMENTS | |
a | AXIAL EXTENSION (mm) | |
b | AXIAL COMPRESSION (mm) | |
c | LATERAL DEFLECTION (mm) | |
d | ANGULAR ROTATION (deg) | |
12 | DIMENSIONAL LIMITIATION (Deg) | |
12.1 | OVERALL LENGTH (mm) | |
12.2 | OUTSIDE DIAMETER (mm) | |
12.3 | INSIDE DIAMETER (mm) | |
13 | INSTALLANTION POSITION | |
14 | END CONNECTION DETAIL | |
14.1 | FLANGED | |
14.2 | FLANGED RATING | |
14.3 | WELDABLE END | |
14.4 | PIPE O.D. X THK | |
15 | MATERIAL OF CONSTRUCTION | |
15.1 | BELLOWS | |
15.2 | LINCER/ INTERNAL SLEEVE | |
15.3 | WELDABLE END | |
15.4 | FLANGES | |
15.5 | EXTERNAL COVER | |
15.6 | TLE/LIMIT ROD | |
16 | SPRING RATE LIMITATIONS | |
16.1 | AXIAL (kg/mm) | |
16.2 | LATERAL (kg/mm) | |
16.3 | ANGULAR (kg/mm) | |
17 | INSPECTION BY |
0